LXNAV Splitter with 4 RJ45 8-pin Ports and cable with RJ45 8-pin connector
For connecting up to 3 devices to a FLARM with 8-pin RJ45 port - such as a PowerFLARM Core, PowerFLARM Portable, LXNAV FlarmBat, or LXNAV PowerMouse.

Two ports pass both transmit (TX) and receive (RX) lines. The other 2 ports pass transmit (TX) only. One of the RX/TX ports should be connected to the cable that goes to the FLARM device. The other RX/TX cable goes to a FLARM remote display and can be used to edit parameters (ranges, etc.) in the FLARM unit. The "TX Only" ports send data to additional FLARM displays, but don't allow those devices to send data to the FLARM unit. That avoids the possibility of having two devices try to send data to the FLARM at the same time.

The included cable has 2 x RJ45 8-pin connectors for connecting the splitter to the FLARM device.

All 4 ports follow the IGC standard - as used by the following products:

  • FLARM
  • PowerFLARM
  • LXNAV LX80x0 or LX90x0 built-in FLARM or PowerFLARM module
  • LXNAV FlarmView
  • Air Avionics ATD-57 Air Traffic Display
  • Naviter Oudie power/data cable
  • Volkslogger

Specifications

  • Ports: 4 x RJ45 ports (IGC standard)
  • Size: 36 x 31 x 18 mm (1.42 x 1.22 x 0.82 inches)
  • Weight (without cable): 0.8 ounces (23 grams)
  • Weight: (with cable): 1.4 ounces (40 grams)
  • Cable Length: 2 feet (60 cm) 

Write a review

Note: HTML is not translated!
    Bad           Good

LXNAV-Splitter-PF-RJ45

  • Brand: LXNAV
  • Product Code: LXNAV-Splitter-PF-RJ45
  • Availability: In Stock
  • $40.00


Related Products

AIR-ATD-57

AIR-ATD-57

AIR Traffic Display, ATD-57Enhance Your Traffic AwarenessAIR Traffic Display is our newly designed p..

$555.00

LXNAV-PowerMouse-FCC-ADSB

LXNAV-PowerMouse-FCC-ADSB

LXNAV PowerMouse-FCC-ADSBThe PowerMouse is a powerful standalone box hidden behind/below the cockpit..

$1,640.00

LXNAV-FlarmLED

LXNAV-FlarmLED

LXNAV FlarmLEDThe new FlarmView is a very small and simple display for use with FLARM and PowerFLARM..

$130.00

LXNAV-FlarmView

LXNAV-FlarmView

LXNAV FlarmViewThe FlarmView is a very small and full-featured display for use with FLARM and PowerF..

$220.00

LXNAV-BlueTooth-Module

LXNAV-BlueTooth-Module

LXNAV Bluetooth Module for S7, S8, S80, S10, S100, and LX80x0 and LX90x0 units with RJ45 PDA po..

$80.00

LXNAV-NanoPower-PF-MicroUSB

LXNAV-NanoPower-PF-MicroUSB

Cable for connecting Nano4 to PowerFLARMThis cable makes it easy to connect a Nano4 to a PowerFLARM ..

$90.00

LXNAV-NanoPower-PF-MiniUSB

LXNAV-NanoPower-PF-MiniUSB

Cable for connecting Nano3 to PowerFLARMThis cable makes it easy to connect a Nano3 to a PowerFLARM ..

$90.00

LXNAV-Splitter-PF-RJ12

LXNAV-Splitter-PF-RJ12

LXNAV Splitter with 4 RJ45 8-pin Ports and cable with RJ12 6-pin connectorFor connecting up to 3 dev..

$40.00

LXNAV-TrafficView

LXNAV-TrafficView

LXNAV TrafficView57 & TrafficView80The TrafficView is designed to have the largest traffic displ..

$490.00

LXNAV-FlarmLED+

LXNAV-FlarmLED+

LXNAV FlarmLED+The new FlarmView+ is a very small and simple display for use with FLARM and PowerFLA..

$180.00

AIR-ATD-11

AIR-ATD-11

AIR Traffic Display, ATD-11The ADT-11 has a larger display than most FLARM traffic displays - making..

$555.00

FLARM-PowerFLARM-Fusion

FLARM-PowerFLARM-Fusion

FLARM Home | Safety Considerations | FLARM Logger IGC Approval | Power..

$1,990.00

Naviter-Bluetooth-Dongle

Naviter-Bluetooth-Dongle

Naviter Bluetooth DongleDescriptionThe Naviter Bluetooth Dongle converts any flight instrument with ..

$99.00

AIR-ATD-80

AIR-ATD-80

AIR Traffic Display, ATD-80*** Fits in large, 80 mm (3 1/8") instrument holeEnhance Your Traffic Awa..

$650.00

LXNAV-FlarmViewPF-CA

LXNAV-FlarmViewPF-CA

Cable for connecting PowerFLARM RJ45 port to FLARM displayFlarm display cable, 70 cm (27.5"), 8-pin ..

$35.00

LXNAV-ADS-B-Receiver

LXNAV-ADS-B-Receiver

LXNAV ADS-B ReceiverA practical standalone ADS-B 1090 IN solution. ADS-B receiver listens to ADS-B 1..

$760.00

Tags: splitter