XCR-4P, Four Place CGA-540 Regulator
CGA-540 port for oxygen cylinder and 4 female CPC ports
Includes 1 extra o-ring and 5 feet (1.52 m) of red 4 mm O.D. tubing
The XCP-FPR regulators (CGA-540 or DIN-477) are available with a high pressure cylinder monitoring gauge.
Our oxygen regulators are constant-pressure calibrated to deliver about 15 psig. (1 bar) of pressure dynamically (that is while flowing). They have been designed to stop the high-pressure inlet side while the low pressure outlet side is stopped (static no-flow condition) at a pressure of about 20 psig. This allows for a semi-remote on/off control action of the regulator. This is utilized in the EDS, XCR on/off control system and in the XCP systems while no stations are connected to any of the outlets.
Rated for inlet pressures up to 3,000 psi (207 Bar).
Note: The gauge in the image at right is on the valve, not the regulator.
Male CPC Connector
This type of connector can be plugged into
an XCP or FPR regulator
Note: The gauge in the image above is on the valve, not the regulator.