Part #:
| Part #:
| Photo
Click on image to view larger version
| Price
|
CAA-128
| Cradle for Compaq Aero 1500 Pocket PC
This is an extremely nice cradle. It is worth the money. It holds the Pocket PC securely
and does not have any cables protruding beneath the cradle. The power/data cable exits
the back of the cradle.
Included: Cradle with short cable exiting the back of the cradle with an RJ connector.
I have a few used units in stock
| 
| $95
|
CAA-098
| Cable, 1 m, for Connecting GPS-NAV or 302 to RJ adapter
DB-9 connector for connecting to GPS-NAV or 302, RJ connector for connecting to CAA-127
57 mm mounting plate or 048-0103-ND RJ adapter.
| 
| $32
|
CAA-127
| 57 mm Mounting Plate with RJ adapter
Includes RJ adapter for connecting the CAA-128 cradle to the CAA-098 cable. Also features
4 holes for mounting a GNeck2 adapter for a GNeck2 gooseneck arm. RAM diamond shaped mounting bases do not connect to this plate.
| 
| $25
|
GNeck2
| Gooseneck 3, 6 or 9 inch
1/8-27 NPSM Threads, The GNeck2 gooseneck is great for mounting a Pocket PC or GPS in a glider. Most pilots mount the base of the gooseneck in the instrument panel. It may be mounted
through a hole in the panel with a nut on the back, or it may be mounted to the optional GNeck2, or in an instrument hole using a Gn57mmPlate2. The GNeck2 can also be used to connect the
other end of the gooseneck to the back of a Cambridge CAA-128 cradle. The optional
RAM-GN3-238 adapter was designed to allow this GNeck2 gooseneck to be mounted to the back of any RAM cradle. Gooseneck length options are 3 in (7.6 cm), 6 in (15.2 cm) or 9 in (22.9 cm).
This gooseneck is much more rugged than the RAP-105-6DD flex arm. 2 nuts are included.
Weights:- GNeck-3in: 1.4 oz (40 g)
- GNeck-6in: 2.5 oz (71 g)
- GNeck-9in: 3.3 oz (94 g)
- RAM-GN3-238: 0.7 oz (20 g)
- GnBase2: 0.4 oz (11 g)
- Gn57mmPlate2: 0.7 oz (20 g)
|
| $25
|
GnBase2
| Gooseneck Base, Round
This aluminum base plate was designed for mounting the GNeck2 gooseneck to the instrument panel. It can also be used to connect the other end of the gooseneck to the back of a Cambridge
CAA-128 or CAA-130 cradle. It is 1 3/16" (30 mm) in diameter. It is nice for use on thin instrument panels where mounting the gooseneck through a hole in the panel is not ideal. Mounting screws
included. The screw holes are threaded so no nuts are required. Weight: 0.4 oz (11 g)
| 
| $15
|
Gn57mmPlate2
| 57 mm Instrument Hole Mounting Plate
Simple square, black, aluminum mounting plate for use in a 57 mm instrument hole.
It has a hole for a GNeck2 gooseneck and a small slot for passing the power/data cable
through the edge of the plate. Mounting screws are included. Weight: 0.7 oz (20 g)
|   | $15
|
RAM-GN3-238
| Gooseneck Base, diamond shaped
The RAM-GN3-238 was designed to allow a GNeck2 gooseneck to be mounted to the back
of any RAM-HOL cradle or a Cumulus iPAQ cradle or a CAA-130 cradle. It can also be used
to mount the gooseneck to the instrument panel or canopy side rail. It has a threaded hole in the
middle that the GNeck2 gooseneck is threaded into. The diamond shaped mounting plate
measures 1.25" x 2.5" and has 2 small holes (not threaded) for the screws that mount it to the cradle. A slot is cut into the bottom of the adapter to allow a cable to be routed out the side.
Black anodized aluminum, Weight: 0.7 oz (20 g),
Gooseneck not included. Mounting screws included with cradle.
|  
| $15
|
RAM-A-101
| Articulated Arm, Short, "A" Size
Articulated Aluminum Arm, Length: 3 1/8 inches (80 mm) from base plate to base plate, It can be
connected to the back of the CAA-128 cradle. The arm is 1.75 inches (44 mm) from ball center to
ball center, 2 Aluminum base plates with small 9/16" (14mm) balls, weight: 2.4 oz (68 g), Diamond
shaped mounting plates are 1.25" (31.8 mm) x 2.5" (63.5 mm). Mounting hardware not included.
This "A" sized mount is significantly smaller than the large "B" sized mounts below. The base
plates have the same footprint, but the arms are very different. I recommend this "A" sized
mount for most applications. The "B" sized mounts are nice when a longer reach is desired.
| 
| $32.00
|
RJ-Coupler-
RJ12-RJ12
RJ-Coupler-
RJ12-RJ12
-Panel
| RJ12 Coupler
Female RJ12 receptacles with 6 conductors on both ends. The connections are "straight-through"
with pin 1 to pin 1, etc.
RJ12 Coupler, Panel Mount
The same the RJ adapter used in the CAA-127 mounting plate. It does not include an aluminum
mounting plate. Female RJ12 receptacles with 6 conductors on both ends. The connections are
"straight-through" with pin 1 to pin 1, etc. Simply cut a 0.675 x 0.9 inch rectangular hole in the instrument panel and mount the connector with the flange on the back of the panel. Secure
with #4 or #5 screws and nuts (not included).Detailed Drawing: RJ-Adapter-Panel-dwg.pdf
|
| $7
$9 |
