RAM® Tab-Tite Universal Spring Loaded Holder for 8" Tablets with Case

Overview

The RAM® Tab-Tite spring-loaded, quick release holder offers a secure fit with easy access to the mounted tablet. The spring-loaded design makes it easy to insert and remove your tablet, while keeping it secure in a variety of applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all buttons, ports, and tablet functions. Included is a set of four nuts and bolts to attach the holder to any RAM® components that contain the universal AMPS hole pattern. For off road environments and use in open cockpit applications, we recommended the use of a tether to assist in securing your device. The RAM® Tab-Tite holder is compatible with any tablet within the listed dimensions.

Great with the TRIPLTEK 7 Pro and TRIPLTEK 8 Pro
This cradle is the most secure way to hold a TRIPLTEK 7 Pro or TRIPLTEK 8 Pro.  However, the top and bottom parts of the cradle are slightly wider than the TRIPLTEK units at 5 7/8" (149 mm) (compared to the 5.20" (132 mm) width of the TRIPLTEK 8 Pro) - so you need to leave a little extra width if you want to mount this cradle to your instrument panel.  When installed, the TRIPLTEK 8 Pro top and bottom ends fit partially through the cradle's end holders and sit exactly even with the ends of the cradle - so the overall installed length is the 8.66 inch (220 mm) length of the TRIPLTEK 8 Pro.  Although the spring-loaded slide action makes it very easy to install the TRIPLTEK with one hand, the slide needs to extend a bit to allow the other end of the device to get into the end holder - so you'll need to allow for an extra 1/2" (13 mm) or so beyond the 8.66" (220 mm) length of the TRIPLTEK 8 Pro for installation.  Although the end holders are a little wider than the TRIPLTEK 8 Pro, the device is held securely in-place with no wiggling or sliding.  I use this cradle to hold my TRIPLTEK 8 Pro to my exercise treadmill for watching TV and movies while I work-out. 

Tip for Mounting to a Flat Surface (such as an instrument panel)
The RAM-HOL-TAB12U has a flat tab on the back on the back of the cradle that is 7.5 mm deep x 74 mm wide (0.3 x 2.91"). The tab is designed as something to grab when sliding the cradle open, but it is not critical for that use.  The device being installed into the cradle can be used to slide open the cradle.  The tab would need to be cut or filed off if you want mount the cradle to a flat surface.  With the tab removed, the cradle should work fine mounted directly to an instrument panel or other flat surface.  Or you could use an 8 mm thick flat plate to stand the unit off the flat surface and allow room for the 7.5 mm deep tab.  I recommend  removing the tab (only when surface mounting).  The tab is not an issue when any RAM part is mounted to the back of the cradle.

Comparison with RAM-HOL-UN8BU X-Grip
The RAM-HOL-TAB12U holds my TRIPLTEK 8 Pro slightly more securely than the RAM-HOL-UN8BU does.  Also, it is easy to install the TRIPLTEK 8 Pro into the RAM-HOL-TAB12U with one hand.  It takes 2 hands to install anything into the RAM-HOL-UN8BU.  However, the RAM-HOL-UN8BU uses a little less space and holds the TRIPLTEK 8 Pro plenty securely for use in a sailplane.  The RAM-HOL-TAB12U can be mounted directly to the instrument panel - it doesn't have a ball mounted directly to the back of it.  The RAM-HOL-UN8BU is only available with a ball on the back - so it can't be mounted directly to an instrument panel.  Both cradles work great on a RAM mounting ARM.

Holder Dimensions

  • Device Height Range: 7.125" to 9.5" (181 to 241 mm)
  • Device Width Range: 5.06" to 5.68" *(129 to 144 mm)
  • Device Depth Range: 0.13" to 1" (3.3 to 25.4 mm)
  • Width of cradle (end parts): 5 7/8" (149 mm)
  • Depth of Cradle (including tab on back): 1.81" (46 mm)
  • Depth of Cradle with tab removed for surface mounting: 1.54" (39 mm)

Hole Pattern (for mounting): 4-Hole AMPS: 1.181" x 1.496"

Features

  • Works great with Tripltek 8 Pro tablet
  • Works great with Tripltek 7 Pro tablet
  • Spring-loaded holder secures iPad mini 1, 2, 3, and 4 with light-duty cases; interchangeable end cups allow you to modify the holder when upgrading devices
  • Compatible with B and C size RAM® round ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability
  • Note: This product is not compatible with the iPad mini 1-3 with LifeProof case.







  • Recommended for Back of Cradle:

(not included)

  • RAP-B-202U, 1" ball on round base
    or
  • RAP-273U, for adhesive mount to instrument panel with 0.75 inch stand-off (You can also mount the cradle directly to the instrument panel without this part.)

Recommended Arms:
(not included)
(scroll down to see product links below)

  • RAP-B-201U - Most popular, Standard length, 3" from center of ball to center of ball, highly recommended
  • RAP-B-201U-A - Short, 1.75" from center of ball to center of ball
  • RAP-B-201-1U - Light duty, 2" from center of ball to center of ball
  • RAP-B-200-12U - Swivel at center for tough positioning jobs, heavy, 3.5" from center of ball to center of ball
  • RAM-B-201U-C - Long, heavy, 5.25" from center of ball to center of ball
  • RAP-B-200-2U - Swivel and pivot features for unique positional jobs, heavy, longest arm, 5.5" from center of ball to center of ball

Recommended Bases:
(not included)
(scroll down to see product links below)

  • RAP-B-238U - Diamond Base, plastic, rugged, great for panel mounting, most popular, highly recommended
  • RAP-273U, for adhesive mount to any smooth surface with 0.75 inch stand-off (You can also mount the cradle directly to the instrument panel without this part.)
  • RAM-B-224U - 4" diameter rubber suction cup, won't hurt your expensive glider canopy
  • RAP-224-1U - 3.25" diameter plastic suction cup, very strong connection, works great with RAP-B-238U, could potentially damage your expensive glider canopy
  • RAP-B-378U - 2.5" diameter flexible adhesive base with double-sided adhesive disc, highly recommended
  • RAM-B-337U - Ball with internal 1/4" -20 camera thread, great for panel mounting in tight spaces, but not ideal for soft fiberglass panels because the load is not spread-out.  The included bolt comes through from the back of the panel into this part.
  • RAM-B-337-57mm - RAM-B-337U base mounted to a black anodized aluminum plate for mounting in a standard 57 mm (2 1/4") instrument hole.
  • RAM-B-337-80mm - RAM-B-337U base mounted to a black anodized aluminum plate for mounting in a standard 80 mm (3 1/8") instrument hole.

Compatibility:

  • Apple
  • iPad mini 6 with Case
  • iPad mini 6 with Case
  • Amazon
  • Fire 7 Kids
  • Fire HD 8 Kids
  • Fire HD 8 with Case
  • ASUS
  • MeMO Pad 8 with Case
  • VivoTab 8 with Case
  • Dell
  • Venue 8 with Case
  • Venue 8 (2014) with Case
  • Venue 8 7840 with Case
  • Venue 8 Pro with Case
  • Huawei
  • MediaPad M3 with Case
  • MediaPad M3 Lite with Case
  • MediaPad T1 8.0 with Case
  • MediaPad T3 8 with Case
  • Lenovo
  • Ideapad Miix 300 with Case
  • IdeaTab A2107 with Case
  • Tab 2 A8 with Case
  • Tab 4 8 with Case
  • Tab 4 8 Plus with Case
  • Tab A8-50 with Case
  • Tab S8 with Case
  • Tab3 8 with Case
  • LG
  • G Pad F 8.0 (2nd Gen) with Case
  • G Pad F2 8.0 with Case
  • G Pad II 8.0 with Case
  • G Pad X II 8.0 with Case
  • Nvidia
  • Shield Tablet with Case
  • Panasonic
  • Toughpad FZ-M1
  • Samsung
  • Galaxy Tab 2 7.0 with Case
  • Galaxy Tab 3 8.0 with Case
  • Galaxy Tab A 8.4 with Case
  • Galaxy Tab E 8.0 with Case
  • Galaxy Tab Pro 8.4 with Case

    Tripltek 
    Tripltek 7 Pro
  • Tripltek 8 Pro

Write a review

Note: HTML is not translated!
    Bad           Good

RAM-HOL-TAB12U

  • Brands Naviter
  • Product Code: RAM-HOL-TAB12U
  • Availability: In Stock
  • $30.00


Related Products

RAM-HOL-UN8BU

RAM-HOL-UN8BU

RAM Universal X-Grip™ II Tablet Holder with 1" Ball for Small Tablets  Sometimes, its all ..

$43.00

RAP-B-238U

RAP-B-238U

Base with 1" Ball, Plastic1" diameter rubber ball on a plastic, diamond shaped mounting plate which ..

$8.00

RAP-B-378U

RAP-B-378U

RAM Round Plastic Base with 1" Ball and AdhesiveThe RAP-B-378U consists of a 2.5" composite base tha..

$15.00

RAP-B-202U

RAP-B-202U

Base Plate, Round, Plastic, with 1" (25.4 mm) "B" Size Ball2 7/16" (62 mm) diameter plastic base pla..

$9.00

RAP-B-201U-A

RAP-B-201U-A

Double Socket Arm for 1" Ball, PlasticThe arm has a socket at either end to allow a 1" diameter ball..

$10.00

RAP-B-201U

RAP-B-201U

Double Socket Arm for 1" Ball, Plastic - RecommendedNote: I recommend this arm for most applica..

$12.00

RAP-B-200-2U

RAP-B-200-2U

Double Socket Swivel and Pivot Arm for 1" Ball, PlasticThis is the longest RAM B arm available. It i..

$24.00

RAP-B-200-12U

RAP-B-200-12U

Double Socket Swivel Arm for 1" Ball, Plastic  The swivel action is very nice.  There..

$17.00

RAP-273U

RAP-273U

Flexible Base with Pressure Sensitive Adhesive Pad, PlasticThe High Strength Composite Semi-Permanen..

$9.95

RAP-224-1U

RAP-224-1U

Suction Cup Base, Plastic, Locking3.25 diameter suction cup base has a rotating locking mechanism th..

$16.00

RAM-B-337U

RAM-B-337U

1" Ball with 1/4"-20 threaded (internal) mounting hole1" diameter ("B" size) rubber ball on an alumi..

$12.00

RAM-B-337-80mm

RAM-B-337-80mm

RAM B mounting base, 80 mm1" RAM ball mounted to a black anodized aluminum plate, mounts in a standa..

$46.00

RAM-B-337-57mm

RAM-B-337-57mm

RAM B mounting base, 57 mm1" RAM ball mounted to a black anodized aluminum plate, mounts in a standa..

$45.00

RAM-B-201U-C

RAM-B-201U-C

Double Socket Arm for 1" Ball, Long, Aluminum - HEAVYNote: This arm is very heavy.  I..

$21.00

TRIPLTEK 8 Pro

TRIPLTEK 8 Pro

TRIPLTEK 8 Pro   Great for Soaring PilotsThe TRIPLTEK 8 inch Pro is an extremely rugged, e..

$795.00

Tags: RAM, Naviter, iPad, Cradle, Tripltek