Flex-Fill, 18, 24, 36, 48 or 60 inch (45.7, 61.0, 91.4, 121.9, or 152.4 cm) with MH-300 Pressure Gauge
Flex-Fill systems make it easy to fill a remotely mounted oxygen cylinder. It is an extension line that plugs into the pressure gauge port on the regulator and brings a fill nipple and pressure gauge out to a more convenient location. It is ideal for use in gliders where the cylinder is mounted in a difficult to reach location. Our integrated fill-stations feature the Swagelok system for the best seal between tubing and fitting. They also have SAE straight-thread with o-ring ports that allow for the most dependable seal.
The free end has an MS22066 male fitting with 3/8-24 thread. The TA-380-N or TA-380-S transfill adapters work with this fitting.
Note: All complete EDS system kits include a cylinder with gauged valve and a regulator that does not have a gauge. The Flex-Fill normally threads into a pressure gauge port on a regulator that would include a pressure gauge. Since standard EDS systems include a regulator without a gauge (and gauge port) the regulator must be upgraded to include a version with a gauge port. For example, an XCR regulator must be upgraded to an XCR-G (MH-00REG-1030-00-Upgrade, $35). The upgraded regulator does not include a pressure gauge because the gauge is included with the Flex-Fill. The price of the upgrade is the price difference between the 2 regulators, minus $25 for the gauge that is not needed. This upgrade will be added when you order a Flex-Fill unit along with an EDS system.
If you already own a regulator with a gauge - please order the "NG" (no gauge) version. You can select that option at check-out.
- Brands Mountain High
- Product Code: Flex-Fill
- Availability: In Stock