Condor Desk Mount 2

Steel Joystick Mount for Thrustmaster Joystick (Thrustmaster T.Flight Stick X). The rugged steel mount clamps-onto the edge of a desk or table (up to 71 mm (2.8 inches) thick) and brings the joystick down and closer to you - so you don't need to hold the joystick in your lap or on top of the table or desktop. (Joystick not included) - Some assembly required.

NOTE: The instructions for assembling the mount are excellent, with one exception.  They are incorrect in regard to the mounting of the Thrustmaster T.Flight Stick X.  The included screws don't fit into the base of the joystick, and the mounting holes on the mounting plate don't match up with any of the screws on the base of the joystick.  My guess is that the joystick design changed after the manufacturer of the mount designed the mounting plate.  The good news is that there is a very easy solution.  I include 4 x 4.5" long pieces of 3M Dual Lock (similar to Velcro, but more rigid) with the mounting kit.  They work great for attaching the base of the joystick to the mounting plate.  I recommend cleaning the base plate and the bottom of the joystick with rubbing alcohol before applying the 3M Dual Lock.  The photos above show how I recommend using the 3M Dual Lock to connect the items.  The joystick's spring adjustment knob on the bottom of the stick is still accessible through the mounting plate.

• Works with the Thrustmaster Joystick (Thrustmaster T.Flight Stick X), Enabling entry-level pilots to have a better gaming experience!
• Also works great with the Thrustmaster Hotas 4/X/One/Stick X/T-16000M Flight Throttle and Joystick Hotas Flight Sim Controller
• Note: This mount is NOT compatible with the Logitech Extreme 3D Pro Joystick (other than using 3M Dual Lock).  The Condor-Desk-Mount is the mount that works with that joystick.
• The ultra-thin panel design makes the height of the panel on the desktop only 4MM after installation, and the design of the round chamfer makes the installation panel not hurt your skin or any part of your body.
• Thanks to the help of the quick release clamp, the fixing bracket can not only be firmly installed, but also can be quickly installed and removed. The upgraded adjustment nut makes it impossible damaged to clamp the table board no matter how hard you use it.
• The careful design makes it very simple to install the Joystick on the mount holder, just need to replace a few screws to finish a perfect installation.

Optional Assembly
The unit is somewhat easy to assemble.  If you're not great at assembling things, I can assemble it for you for $30.  Please check the Assembly checkbox option at right.