Nano3 Mount
A simple plastic mount for the Nano3. It is supplied with 3M weather-proof adhesive pads for attaching the base to the glider and the disc to the bottom of the Nano3. The disc has grooves which allow it to click when you rotate the Nano3 through 360 degrees - allowing you to position it precisely and have it stay in place.

It works fine with any small glider accessory. However, if you want to be able to remove the disc from the base, make sure to allow access the small tab.

- Diameter of disc: 1" (26 mm)
- Diameter of base: 1.25" (32 mm)
- Mounted Height (including adhesive pads): ~0.25" (~6 mm)

Mounting Instructions:

  1. Clean the surface with alcohol
  2. Put on the 3M adhesive pads
  3. Wait 24 hours and it’s ready to use

Connect to

Write a review

Note: HTML is not translated!
    Bad           Good

LXNAV-Nano3 Mount

  • Brand: LXNAV
  • Product Code: LXNAV-Nano3-Mount
  • Availability: In Stock
  • $20.00

Related Products



LXNAV Nano 3 GPS Flight Recorder with variometer and color navigation displayLXNAV Nano3 Overview&nb..