Cable, ILEC SN-10 (S/N: > 99) to Instrument Panel and FLARM or PowerFLARM
This cable is designed to enable an SN-10 to be connected to a FLARM or PowerFLARM and an instrument mounted PC data connector.  It replaces the ILEC "Cockpit Panel Cable".  It includes all the connections found in that cable.  3 cables exit the back of the DB-9m connector that plugs into the SN-10.  A 0.5 m (19.7") cable goes to a DB-9f connector that is to be mounted in the instrument panel.  This connector is used for data transfers to the SN-10 from a PC and for connection of the SN10-R remote control unit.  A 1 m (39.4") cable goes to an RJ connector for the FLARM or PowerFLARM.  GPS data and traffic data from the FLARM goes to the SN-10.  12V power leads also exit the connector on the back of the SN10.  They must be connected to the glider's electrical system.  They provide 12V power for the FLARM or PowerFLARM.