Oxymizer Cannula - XCP version
The Oxymizer's unique oxygen-conserving reservoir design accumulates (saves) the continuous flow of oxygen normally wasted during exhalation.  The saved oxygen is available as a bonus at the very beginning of each inhalation cycle where oxygen is taken deeper into the lungs, allowing a much greater absorption efficiency.  Thus, a smaller flow rate is required over conventional cannulas saving your precious oxygen.  The Oxymizer's unique design closely emulates the function of much more complicated and expensive diluter demand regulators.  Tests have show pilot using the Oxymizer need only 0.750 liter/minute at 18,000 feet to obtain more than 95% of saturated oxygen in the blood.  A standard cannula or facemask will require about 2 liters/min at 18,000 ft.  The Oxymizer will properly oxygenate the blood using only 1/3 the oxygen needed by standard cannulas resulting in up to 66% of saved oxygen.  

The Oxymizer "M" type (moustache-style) oxygen-conserving cannula (shown) is the most popular version. Also available is the Oxymizer "P" or pendant-style Oxymizer (not shown).  The Oxymizer is standard issue with our XCR and XCP constant flow systems and may work with almost any adjustable constant flow regulator.

Note: The Oxymizer cannula is not compatible with any EDS system.

This version of the Oxymizer includes a female adapter that slides onto the male connector on the top of an MH3 or MH4 flowmeter.

Oxymizer Cannula Catalog Page

Write a review

Note: HTML is not translated!
    Bad           Good

MH-00XCP-1044

  • Brand: Mountain High
  • Product Code: XCP-OX-M
  • Availability: In Stock
  • $30.00


Related Products

MH-0MH34-0101-03

MH-0MH34-0101-03

MH3 FlowmeterFor Oxymizer Cannula Only - 18,000 feetThe MH3 has an altitude/flow scale calibrated fo..

$65.00

MH-0MH34-0101-04

MH-0MH34-0101-04

MH4 FlowmeterFor Oxymizer Cannula or Standard Cannula or Standard Face Mask - 25,000 feetThe MH4 flo..

$65.00

MH-00BNC-1000-00

MH-00BNC-1000-00

BNC Breathing Station with MH3 Flowmeter and PB 750 BNC Connector, Oxymizer Cannula and TubingComple..

$160.00

MH-00BNC-1001-00

MH-00BNC-1001-00

BNC Breathing Station with MH4 Flowmeter and PB 750 BNC Connector, Face Mask and TubingComplete brea..

$160.00

MH-00BNC-1002-00

MH-00BNC-1002-00

BNC Breathing Station with MH3 Flowmeter and PB 566 BNC Connector, Oxymizer Cannula and TubingComple..

$160.00

MH-00BNC-1006-00

MH-00BNC-1006-00

BNC Breathing Station with MH3 Flowmeter and Scott 100 BNC Connector, Oxymizer Cannula and TubingCom..

$160.00

MH-00BNC-1007-00

MH-00BNC-1007-00

BNC Breathing Station with MH4 Flowmeter and Scott 100 BNC Connector, Face Mask and TubingComplete b..

$160.00

MH-00XCP-1036

MH-00XCP-1036

MH3 Flowmeter with CPC Fittings for use with XCP systemsFor Oxymizer Cannula Only - 18,000 feetThe M..

$79.00

MH-00XCP-1037

MH-00XCP-1037

MH4 Flowmeter with CPC Fittings for use with XCP systemsFor Oxymizer Cannula or Standard Cannula or ..

$79.00

MH-00XCP-1070-00

MH-00XCP-1070-00

Breathing Station with MH3 Flowmeter and Oxymizer Cannula - 18,000 feetFor use with XCP system. ..

$125.00

MH-00XCP-1071-00

MH-00XCP-1071-00

Breathing Station with MH4 Flowmeter, Oxymizer Cannula and XCP-F1 Standard Mask - 25,000 feetFor use..

$125.00

MH-00XCP-0052-xx

MH-00XCP-0052-xx

One or Two Place System with MH3 or MH4 Flowmeter(s), XCP or FPR Regulator, AL-113 (4.1 cu. ft...

$559.00

MH-00XCP-0054-xx

MH-00XCP-0054-xx

One or Two Place System with MH3 or MH4 Flowmeter(s), XCP or FPR Regulator, AL-180 (5.8 cu. ft...

$599.00

MH-00XCP-0058-xx

MH-00XCP-0058-xx

One, Two, or Four Place System with MH3 or MH4 Flowmeter(s), XCP or FPR Regulator, AL-248 (8.8 ..

$625.00

MH-00XCP-0060-xx

MH-00XCP-0060-xx

One, Two, Four, or 6 Place System with MH3 or MH4 Flowmeter(s), XCP or FPR Regulator, AL-415 (1..

$659.00

MH-00XCP-0062-xx

MH-00XCP-0062-xx

One, Two, Four, or 6 Place System with MH3 or MH4 Flowmeter(s), XCP or FPR Regulator, AL-647 (2..

$749.00

MH-00XCP-0002-xx

MH-00XCP-0002-xx

One, Two or Four Place System with MH3 or MH4 Flowmeter(s), XCP or FPR Regulator, KF-011 (11 cu. ft...

$1,200.00

MH-00XCP-0004-xx

MH-00XCP-0004-xx

Two or Four Place System with MH3 or MH4 Flowmeter(s), FPR Regulator, KF-022 (22 cu. ft.) Kevla..

$2,340.00

MH-00XCP-0010-xx

MH-00XCP-0010-xx

Two or Four Place System with MH3 or MH4 Flowmeter(s), FPR Regulator, KF-077 (77 cu. ft.) Kevla..

$2,495.00

MH-00XCP-0012-x4

MH-00XCP-0012-x4

Four Place System with MH3 or MH4 Flowmeter(s), FPR Regulator, KF-115 (115 cu. ft.) Kevlar Wrap..

$2,779.00

MH-00XCP-0014-xx

MH-00XCP-0014-xx

Two or Four Place System with MH3 or MH4 Flowmeter(s), FPR Regulator, CFFC-048 (48 cu. ft.) Car..

$1,500.00

MH-00XCP-0082-xx

MH-00XCP-0082-xx

One, Two, or Four Place System with MH3 or MH4 Flowmeter(s), XCP or FPR Regulator, CFF-480 (18...

$1,299.00

MH-00XCR-0054-x1-x

MH-00XCR-0054-x1-x

One Place System with MH3 or MH4 Flowmeter, XCR Regulator, AL-180 (5.8 cu. ft.) Aluminum Cylind..

$540.00

MH-00XCR-0058-x1

MH-00XCR-0058-x1

One Place System with MH3 or MH4 Flowmeter, XCR Regulator, AL-248 (8.8 cu. ft.) Aluminum Cylind..

$749.00

MH-00XCR-0060-x1

MH-00XCR-0060-x1

One Place System with MH3 or MH4 Flowmeter, XCR-1P-Axial Regulator, AL-415 (14.7 cu. ft.) Alumi..

$749.00

MH-00XCR-0062-x1

MH-00XCR-0062-x1

One Place System with MH3 or MH4 Flowmeter, XCR Regulator, AL-647 (22.8 cu. ft.) Aluminum Cylin..

$839.00

MH-00XCR-0002-x1

MH-00XCR-0002-x1

One Place System with MH3 or MH4 Flowmeter, XCR-1P-Axial Regulator, KF-011 (11.0 cu. ft.) Kevla..

$1,195.00

MH-00XCR-0004-x1

MH-00XCR-0004-x1

One Place System with MH3 or MH4 Flowmeter, XCR Regulator, KF-022 (22 cu. ft.) Kevlar Wrapped C..

$2,095.00

MH-00XCR-0084-x1

MH-00XCR-0084-x1

One Place System with MH3 or MH4 Flowmeter, XCR Regulator, CFF-480 (18.2 cu. ft.) Silica (Glass..

$1,495.00

Tags: Oxymizer Cannula, 00XCP-1044