MH3 Flowmeter with CPC Fittings for use with XCP systems
For Oxymizer Cannula Only - 18,000 feet
The MH3 has an altitude/flow scale calibrated for the unique Oxymizer oxygen-conserving cannula. The scale is marked in 2,000 ft. increments for flight levels up to 18,000 ft. To receive the proper amount of oxygen, simply adjust the MH3 to where the scale reads the same altitude you are flying. Example: If you are at 15,000 ft. you would hold the meter vertical and adjust the needle valve on the MH3 to where the ball reads between the 14 and 16 on the scale. Counter clock-wise increases and clock-wise decreases oxygen flow. The outlet flow of the MH3 can be adjusted well beyond the limits of the scale for emergency purposes. Includes 1 meter of tubing and XCP connector.

Maximum Altitude: 18,000 feet

Write a review

Note: HTML is not translated!
    Bad           Good

MH-00XCP-1036

  • Brands Mountain High
  • Product Code: XCP-MH3 only
  • Availability: In Stock
  • $79.00


Related Products

MH-00XCP-1044

MH-00XCP-1044

Oxymizer Cannula - XCP versionThe Oxymizer's unique oxygen-conserving reservoir design accumulates (..

$30.00

MH-00XCP-1070-00

MH-00XCP-1070-00

Breathing Station with MH3 Flowmeter and Oxymizer Cannula - 18,000 feetFor use with XCP system. ..

$125.00

MH-00XCP-1071-00

MH-00XCP-1071-00

Breathing Station with MH4 Flowmeter, Oxymizer Cannula and XCP-F1 Standard Mask - 25,000 feetFor use..

$125.00

MH-00REG-2101-10

MH-00REG-2101-10

XCP 1-Place Radial CGA-540 Regulator with CPC Port and GaugeCGA-540 port for oxygen cylinder and fem..

$298.00

MH-00REG-2100-10

MH-00REG-2100-10

XCP 1-Place Radial CGA-540 Regulator with CPC Port (no gauge)CGA-540 port for oxygen cylinder and fe..

$289.00

Tags: 00XCP-1036