Flex Arm, 3, 6, or 9 inch (for PDA mounts) and 12 or 18 inch (for microphones)
1/8-27 NPSM ThreadsThe GNeck2 gooseneck flex arm is great for mounting a Pocket PC or GPS in a glider.  Gooseneck length options are: 3 in (7.6 cm), 6 in (15.2 cm), 9 in (22.9 cm), 12 in (30.5 cm) and 18 in (45.7 cm).

Most pilots mount the base of the gooseneck on the instrument panel.  It may be mounted through a hole in the panel with a nut on the back, or it may be mounted to the optional GnBase2, or in an instrument hole using a Gn57mmPlate2.   The optional RAM-GN3-238 adapter was designed to allow this GNeck2 gooseneck to be mounted to the back of any RAM cradle or Nimbus cradle.

Note: The 12 in and 18 in long goosenecks are for use with microphones only.  They are not strong enough to support a PDA or GPS.  They are for use with microphones from Becker, Walter Dittel, Filser and Peiker Acustic.  The 1/8-27 NPSM threads are compatible with the M10 threads in the microphone head.  These are the goosenecks I sell with the Peiker Acustic microphone heads.

Specifications:

  • Threads: 1/8-27 NPSM (straight thread) (similar to, but slightly different from M10 threads)
  • Outside diameter of threads: 10 mm (0.39 inches)
  • Diameter of gooseneck: 13 mm (0.51 inches)
  • Diameter of wide part near ends: 16 mm (0.63 inches)

Weights:

  • GNeck2-3in: 1.4 oz (40 g)
  • GNeck2-6in: 2.5 oz (71 g)
  • GNeck2-9in: 3.3 oz (94 g)
  • GNeck2-12in:
  • GNeck2-18in:
  • RAM-GN3-238: 0.7 oz (20 g)
  • GnBase2: 0.4 oz (11 g)
  • Gn57mmPlate2: 0.7 oz (20 g)

Write a review

Note: HTML is not translated!
    Bad           Good

GNeck2

  • $25.00


Available Options


Related Products

RAM-GN3-238

RAM-GN3-238

Gooseneck Base, diamond shapedThe RAM-GN3-238 was designed to allow a  gooseneck to be mounted ..

$15.00

GnBase2

GnBase2

Gooseneck Base, RoundThis aluminum base plate was designed for mounting the GNeck2 goosene..

$15.00

GNeckMicAdapterME510

GNeckMicAdapterME510

Gooseneck Microphone Adapter ME510This is a very classy and rugged part. It is used to connect a Pei..

$11.00

GNeckMicAdapterTM170

GNeckMicAdapterTM170

Gooseneck Microphone Adapter TM170This is a very classy and rugged part. It is used to connect a Pei..

$11.00

GNeckMountRA

GNeckMountRA

Mounting Bracket for Gooseneck Flex Arm, Right AngleThis is a very classy and rugged part. It is mac..

$15.00

Gn57mmPlate2

Gn57mmPlate2

Gn57mmPlate2 - 57 mm Instrument Hole Mounting PlateSimple square, black, aluminum mounting plate for..

$15.00

Gn57mmPlateDB-9

Gn57mmPlateDB-9

Gn57mmPlateDB-9 - 57 mm Instrument Hole Mounting Plate for DB-9 ConnectorThe Gn57mmDB-9 is a aluminu..

$15.00

GNeck2-Assy-Thru

GNeck2-Assy-Thru

Flex Arm Assembly, Through Panel MountPerfect for mounting and RAM or Nimbus cradle to the instrumen..

$40.00

GNeck2-Assy-Panel

GNeck2-Assy-Panel

Flex Arm Assembly, Instrument Panel MountPerfect for mounting and RAM or Nimbus cradle to the instru..

$55.00

GNeck2-Assy-Panel-DB-9

GNeck2-Assy-Panel-DB-9

Flex Arm Assembly, Instrument Panel Mount - with Panel Mounted DB-9f Connector - My Favorite Op..

$110.00

GNeck2-Assy-Side

GNeck2-Assy-Side

Flex Arm Assembly, Cockpit Side Wall MountPerfect for mounting and RAM or Nimbus cradle to the cockp..

$55.00

GNeck2-Assy-Plate

GNeck2-Assy-Plate

Flex Arm Assembly, With Plate for Small Instrument HolePerfect for mounting and RAM or Nimbus cradle..

$55.00

GNeck2-Assy-Plate-DB-9

GNeck2-Assy-Plate-DB-9

Flex Arm Assembly, With DB-9 Mounting Plate for Small Instrument Hole, and Extension CablePerfect fo..

$110.00

Goddard:LX7007-Pnl-0.5

Goddard:LX7007-Pnl-0.5

Cable, 0.5 m (19.7 inches), LX Navigation LX7007 Pro IGC to Instrument Panel Mountable DB-9f Co..

$55.00

CAA-128

CAA-128

Cradle for Compaq Aero 1500 Pocket PCI have a few used units in stockThis is an extremely ..

$95.00

CAA-127

CAA-127

57 mm Mounting Plate with RJ adapterIncludes RJ adapter for connecting the CAA-128 cradle ..

$25.00

Naviter-Oudie-Mount-GNeck-Panel

Naviter-Oudie-Mount-GNeck-Panel

Oudie Gooseneck Mount with Panel AdapterThis is a great way to mount your Oudie, Oudie 2 or Oudie IG..

$72.00

Naviter-Oudie-Mount-GNeck-RA

Naviter-Oudie-Mount-GNeck-RA

Oudie Gooseneck Mount with Right-Angle AdapterThis is a great way to mount your Oudie, Oudie 2 or Ou..

$72.00