Suction Cup Base, Plastic, Locking
3.25 diameter suction cup base has a rotating locking mechanism that pulls a strong suction for secure adhesion to the mounting surface.  Compatible with any diamond-shaped mounting plate (RAM-A-238URAP-B-238U,RAM-B-238URAP-105-6DDU, etc.).  This mounting base has a smaller diameter than the RAM-B-224U rubber suction cup, but it is taller.  I prefer the RAM-B-224U rubber suction cup mount because it is easier to mount, won't damage your canopy, and is shorter. This mount is nice, however, if you already have a RAM-A-101U arm and want to temporarily mount it to a flat surface. Weight: 2.6 oz (74 g)
NoteI prefer the RAM-B-224 rubber suction cup mount to this suction cup mount because it is easier to mount, can't damage your canopy, and is less tall. 
Note: The RAP-224-1U suction cup pulls a very strong suction so you may not want to use it on an expensive glider canopy.  If you decide to use it, I am not responsible for any damage to your canopy.  That said, I have used it on glider canopies safely using a trick.  Before you apply it to the canopy, turn the locking ring halfway through its rotation.  Then press it against the mounting surface and turn it the remaining distance to lock it in place.  If it doesn't mount securely enough, try only turning the locking ring 1/4 turn before you apply it to the mounting surface, etc.
Note: If you use suction cups to mount items to a club owned or syndicate owned glider canopy, please be considerate and clean the canopy when you are done flying.  If we don't do this simple step it is likely that the club will ban the use of suction cup mounts - which would be a shame.

Write a review

Note: HTML is not translated!
    Bad           Good

RAP-224-1U

  • Brands RAM
  • Product Code: RAP-224-1U
  • Availability: In Stock
  • $9.95


Related Products

RAM-B-238U

RAM-B-238U

Base with 1" Ball, Aluminum1" diameter rubber ball on a Marine grade Aluminum, diamond shaped mounti..

$8.00

RAP-B-238U

RAP-B-238U

Base with 1" Ball, Plastic1" diameter rubber ball on a plastic, diamond shaped mounting plate which ..

$7.00

RAM-A-101U

RAM-A-101U

Articulated Arm, Short, "A" SizeArticulated Aluminum Arm, Length: 3 1/8 inches (80 mm) fro..

$31.00

RAM-A-238U

RAM-A-238U

Base with 9/16" BallMarine grade Aluminum, 9/16" diameter rubber ball, Diamond shaped mounting ..

$11.00

RAP-105-6DDU

RAP-105-6DDU

Flex Arm, 6 inchThis is a very stiff flexible arm.  It is not are rugged as the GNeck2&nbs..

$9.95

RAM-B-224U

RAM-B-224U

Suction Cup Base with 1" BallMarine grade Aluminum base mounted in a 4" diameter rubber suction cup,..

$27.00