ClearNav Through-Panel Mounting Kit
Note: This Option is Probably Going To Fade Away in Favor of the Behind Panel Mounting Kit below.

Aluminum bezel, standoffs, support bracket and template for mounting ClearNav display recessed into the panel.  The ClearNav does not sit flush with the front of the panel - it stands out about 9 mm (0.35 in).  This is the most clean and elegant way to install the ClearNav.  One subtle advantage to this mounting technique is that the unit will be underneath the instrument panel cover overhang – which will reduce glare and make the unit even easier to read in sunlight than it already is by design.

In the photos at right I used the yellow template as a stand-in for the instrument panel - to clarify which parts are on each side of the panel.

Note: The SD card reader slot is mounted on the side of the ClearNav Display and is not accessible from the pilot side of the panel when the ClearNav In-Panel Mounting Kit is used. That should not be a problem because a USB Flash Drive can be used for transferring files through the panel mounted CAN/USB Extension cable.

Dimensions
Width of black bezel: 123 mm (4.84 in)
Height of black bezel: 162 mm (6.38 in)
Thickness of black bezel: 1 mm (0.04 in)
Distance ClearNav stands out on the pilot side of the panel: 9 mm (0.35 in)
Distance from the back of the black bezel to the back of the aluminum mounting plate: 21 mm (0.83 in)
Distance (approx.) from the back of the black bezel to the back of the Nexus Wiring Board's largest connector: 54 mm (2.13 in)


Lead time: 1 week

Write a review

Note: HTML is not translated!
    Bad           Good

CNi-0630

  • $60.00


Related Products

CNi-0633

CNi-0633

ClearNav Behind Panel Mounting KitThis kit is designed to allow you to mount the ClearNav to the bac..

$45.00

Tags: panel mount