Aircraft Speaker Box and Wire Junction Box
4 Ohm, 30 Watt, small, robust case, for 2 mikes or headsets, 5-pole sockets, fits F10028 or F10029 harness.  Highly recommended!  When used with the 
F10028 - Wiring harness this speaker box acts as a wire junction box and makes it possible to connect all accessories without any soldering or even using a screwdriver.  See photos at right.  All connection terminals are labeled to make it easy to connect everything together.

The DIN connectors for the microphone connections are the DIN-5m-240 version - as shown below. They are not compatible with the DIN-5m-180 connectors used on Becker microphones and speakers.

This speaker/junction box also works great with Becker AR4201, AR6201, and RT6201 radios - toghether with the Goddard: Cable-Becker-AR6201-DittelSpkr-3 and a Dittel F10039 Gooseneck Microphone or Peiker TM170-23in with DIN-5m-240.

Note: This speaker has a very powerful magnet inside.  Do not mount it anywhere near a compass.  After you install it you should re-swing your compass.  The same is true for all speakers.

Wiring Details or FSG2T Install and Operation Manual

Write a review

Note: HTML is not translated!
    Bad           Good


  • Brands Becker
  • Product Code: F10061
  • Availability: In Stock
  • $155.00

Related Products



Cable, 3 m (9.843 feet), Wiring Harness for Becker AR4201, AR6201 or RT6201 with Dittel F10061 Speak..


Dittel-Radio Wiring Harness

Dittel-Radio Wiring Harness

Wiring Harness Assembly3.2m (10.5 ft), with DB-15 connector and numbered flat connectors.  For ..


Dittel-Dynamic Gooseneck Microphone

Dittel-Dynamic Gooseneck Microphone

Dynamic Gooseneck MicrophoneLength of gooseneck from base to end of microphone: 370 mm (14.5"), Cabl..