Technical Specifications
Environmental
Altitude Min. 0 ft. Max. 22,000 ft (FL220)
Temperature Min. -15°C (+5°F) Max. +60°C (+140°F)
Pressure Min. 0 kPA (0 PSI) Max. 100 kPA (14.5 PSI)
Humidity Tested to 100% humidity  
 
Mechanical
Dimensions 3.9 (100 mm) Width
  3.6 (93 mm) Depth
  2.7 (69 mm) Height (includes antenna)
Weight 8.2 oz. (232.5 g)  
 
Electrical
Power 10-48 VDC Negative ground
Consumption @ 14V 4.2 watts max.
  @ 24V 2.6 watts max.
Current 450-500 mA 475 mA nominal
Connector Type 2.35mm mini Tip positive
 
Receiver
Type Superheterodyne / PLL x4
Selectivity 1090 MHz  
Bandwidth ±8.1 MHz  
Signal Modes X, Y, A, C, S, 2, 3/a, 3/c
Scan Rate 3.2 kHz  
Data Rate 1000 kbps  
MTL Sensitivity -78 dBm  
Max Peak Power +28 dBm  
Max Detection Range 22.0 NM 100% Error Rate
  7.0 NM 10% Error Rate
Dynamic Range 68 db  
 
Accuracy
Range Resolution 0-2.0 NM ±0.1 NM
  2.0-3.0 NM ±0.2 NM
  3.0-6.0 NM ±1.0 NM
Bearing Resolution 30° (45° displayed)  
Altimeter Accuracy ±200 ft.  
Compass Accuracy ±20°  
Bank/Pitch Accuracy ±6°  
Temperature Sense 0.1°C  
 
Antenna Array
Type Directional capable, internal, multi-element directional array
Number of Antennas 4  
Open Space ±8.2°  
Obstruction ±30°  
Sense Amplitude / Phase  
Phase Balance ±12°  
Amplitude Balance ±0.5  
Phi Range >65°  
Polarization Cross  
Gain +2.2 dBi  
 
Display
Type FSTN Liquid Crystal Display, Black/White, Wide Temp
Resolution 122 x 32  
Viewing Angle 12:00  
Backlight White Electroluminescent  
 
Audio
Impedance 300 ohms x 2 channels or 600 ohms x 1 channel, selectable
Power 4.0 watts max. @ 2.5 volts peak-to-peak
Compatibility Stereo / Mono selectable, ground isolation or connection