ACII™ Economy Model Aircraft Weighing System

Finally, a low cost yet reliable scale system available to operators for weighing light aircraft to determine center of gravity.  Intercomp introduces the ACII Economy Model Aircraft Weighing System

This economy model enables you to justify purchasing an ultra efficient scale system versus outsourcing the work to an independent weighing service.

The ACII is built from Intercomp's fully electronic scale technology.  Intercomp has supplied this technology to the world's major airlines, manufacturers, maintenance centers and military branches.

This system consists of three ultra-light platform scales and is cabled to the ACII Indicator.  The large LCD screen allows you to display each platform and total weight.  Other push button controls include on/off, percentage of weight and zero.

The ACII operates from both AC and DC power sources and includes a nicad rechargeable battery pack and transformer.  Both models weigh less than 105 lb/48 kg granting you the ultimate in portability.

Individual platforms are available in either 1,500 lb/675 kg or 2,500 lb/1100 kg capacities meaning you can weigh virtually any ultralight, trainer, UAV, single engine or kit airplane.  This high performance scale can easily be calibrated on site by the operator, negating the need to send the system out for required annual calibration. The ACII Economy Model Aircraft Weighing System is ideal for production lines, f.b.o.'s, aviation schools, flight test, preliminary design or even for starting your own weighing service.  For more information please contact the aviation industry's leader in fully electronic aircraft weighing systems.

ACII™ of Intercomp   © Intercomp 1996  All rights reserved

ACII Specifications
All controls are located on a waterproof membrane keypad with large contact surfaces. On/Off: Two separate switches for unambiguous operation. Zero: Pushbutton zero checks for motion as per NIST/OIML requirements. Lb/kg: Sets units of measure. Indicators: Low battery, lb/kg, error message. Features Latitude Correction: Facility to enter correction values (Default 45°). Calibration: Keypad calibration corrects any out of tolerance condition. Motion Detection: Checks for motion or movement on scale to prevent error in weight reading. Auto Shut Off: Shuts off automatically when not in use to conserve battery life (variable). Backlight: Automatic sensor illuminates display in low light conditions.

ACII Electronics Accuracy: ±0.1% of reading or ±.02% of channel capacity. Circuit Board: CMOS 20 bit ultra high precision A/D converter with high efficiency micro controller, Input/Output: RS-232, RS-485 or 20mA, Indicators: Charging, lb/kg, low battery, motion detection and error messages. Connectors: Mil Spec Power Cord: 10, 25, 50, 100 or 150 ft./3.7, 7.5, 15, 30 or 48 m (other lengths available), Power Source Required: 12 VDC, 120/220 VAC, Batteries: NiCad rechargeable (standard) or Alkaline Charging, Voltage: 11.5 volts - 14.5 volts DC. Protection is provided for accidental reversal of the charging connections, Battery Endurance: 8 hours of continuous use to low battery indicator and two hours after that before scale shuts off Auto Shut Off: Shuts off automatically when not in use to conserve battery life (variable), Digital Filtering: Average of several internal weights gives steady readings for unstable, wind blown loads, Auto Zero: Meets all NIST/OIML requirements